Name: ANTRACK V2-EC2-DT
Brand: Bitmain
SKU: antrack-v2-ec2-dt
Price: 2888.00 USD
Availability: InStock

Question 1

Is the ANTRACK V2-EC2-DT profitable in 2026?

Accepted Answer

Profitability for the ANTRACK V2-EC2-DT depends on three variables: your electricity rate, the SHA-256 network difficulty, and the coin price. As a rule of thumb, a machine rated 1Set24kW4 Standard Hydro-cooling ANTMINER stays profitable at power costs under roughly $0.08/kWh, and is comfortable under $0.05/kWh in hosted or industrial facilities. Send us your kWh rate and we will run a live daily-revenue and break-even model for your exact setup before you buy.

Question 2

What is the ROI or payback period on the ANTRACK V2-EC2-DT?

Accepted Answer

At $2,888 hardware cost, typical payback for this class of miner runs about 12–24 months at $0.06–0.07/kWh, and can shorten to 8–14 months at industrial rates near $0.04/kWh. ROI improves when difficulty flattens or the coin price rises, and lengthens after each difficulty increase, so we recommend modelling a conservative case. Our team provides a free written ROI projection with every quote.

Question 3

How much power does the ANTRACK V2-EC2-DT use and what electrical setup do I need?

Accepted Answer

The ANTRACK V2-EC2-DT requires a dedicated 200–240V circuit rather than a standard residential outlet, plus a PDU rated for continuous load with 20% breaker headroom. Contact our team for the exact amperage and connector requirements of your configuration.

Question 4

How do I set up the ANTRACK V2-EC2-DT?

Accepted Answer

Setup takes under 30 minutes: rack or shelf the unit with clear intake and exhaust airflow, connect the 200–240V PSU feed, plug in Ethernet (Wi-Fi is not supported), then find the miner's IP with the manufacturer's IP reporter or your router's DHCP list. Log in to the web dashboard, enter your mining pool URL, worker name and password, save, and confirm the hashrate stabilises at the rated figure within 15–20 minutes. We ship a printed quick-start guide and offer free remote setup support.

Question 5

What hosting, cooling and noise should I plan for with the ANTRACK V2-EC2-DT?

Accepted Answer

Air-cooled units of this class run around 70–80 dB — too loud for a home office or apartment, so most buyers use a garage, dedicated shed, or a professional hosting facility. Keep intake air below 35°C and maintain negative-pressure exhaust so hot air is never recirculated. Bitcoin Mining Depot offers hosting from $0.06–0.08/kWh with 24/7 monitoring if you would rather not run the hardware yourself.

Question 6

Which coins and pools can the ANTRACK V2-EC2-DT mine?

Accepted Answer

The ANTRACK V2-EC2-DT is an SHA-256 ASIC, so it mines coins on that algorithm only — it cannot be reprogrammed for other algorithms. It works with all major pools (F2Pool, ViaBTC, Antpool, Foundry USA, Luxor and others) using standard stratum configuration, and supports up to three pool endpoints for automatic failover.

Question 7

How much does the ANTRACK V2-EC2-DT cost and do you offer bulk pricing?

Accepted Answer

This unit is listed at $2,888. Orders of 5+ units qualify for wholesale tiers, and 50+ unit deployments receive container-level pricing with dedicated logistics. We accept bank wire, USDT and BTC; escrow is available on large orders. Request a quote and we will confirm live stock and landed cost to your location.

Question 8

Is the ANTRACK V2-EC2-DT new or used?

Accepted Answer

This ANTRACK V2-EC2-DT is supplied in New condition. Every unit is bench tested before dispatch and ships with a measured hashrate report.

Question 9

What warranty comes with the ANTRACK V2-EC2-DT?

Accepted Answer

New miners carry the manufacturer warranty, normally 12 months. Refurbished and used units carry a 6 month Bitcoin Mining Depot warranty handled by our in-house repair lab.

Question 10

How is the ANTRACK V2-EC2-DT shipped?

Accepted Answer

In-stock units dispatch within one to three business days on insured, tracked freight with pre-filled customs paperwork. We ship to more than 100 countries.

Question 11

Can I return the ANTRACK V2-EC2-DT if it does not perform as rated?

Accepted Answer

Yes. Every unit is hashrate-verified before dispatch, and if a miner arrives dead-on-arrival or hashes materially below spec, report it within 7 days of delivery for a replacement or repair at our cost. Our in-house lab also handles out-of-warranty hashboard, PSU and control-board repairs.

Question 12

What water cooling loop does the ANTRACK V2-EC2-DT require?

Accepted Answer

The ANTRACK V2-EC2-DT is a hydro-cooled ASIC and cannot run on air. It must be plumbed into a closed water loop with a dry cooler or cooling tower, a circulation pump, filtration and a coolant reservoir. Plan for roughly 55–65°C outlet temperature, an inlet target of 30–45°C, and a flow rate around 6–8 litres per minute per unit. Bitcoin Mining Depot supplies matched hydro containers, manifolds and quick-connect fittings with every order.

Question 13

What coolant and water quality does the ANTRACK V2-EC2-DT need?

Accepted Answer

Use deionised or distilled water with a corrosion-inhibiting glycol mix (typically 10–20%) — never untreated tap water, which scales the cold plates and voids warranty. Check pH quarterly, keep particulate filtration at 50 microns or finer, and flush the loop annually. We include a coolant specification sheet and can pre-commission your loop before shipping.

Question 14

How much heat can I recover from the ANTRACK V2-EC2-DT?

Accepted Answer

Almost all of the rated input power leaves the machine as hot water, so a single unit can feed district heating, greenhouses, drying rooms or industrial process water. Heat recovery commonly cuts effective mining cost by $0.01–0.02/kWh, materially shortening the payback period versus an air-cooled deployment.

Question 15

Is the ANTRACK V2-EC2-DT quieter than an air-cooled miner?

Accepted Answer

Yes. Hydro units run around 45–50 dB versus 70–80 dB for air-cooled ASICs because there are no high-RPM fans in the miner itself — the only noise comes from the pump and external dry cooler. That makes hydro viable on sites with residential noise limits where air-cooled machines are not.

Question 16

What three-phase power and site infrastructure does the ANTRACK V2-EC2-DT need?

Accepted Answer

Hydro machines of this class run on industrial three-phase service (typically 380–480V) with a correctly sized breaker per unit and a hydro-rated PDU — single-phase residential service is not sufficient. Budget the electrical build, the cooling loop and pump load together. Send us your one-line diagram and site plan and we will confirm feasibility before you order.

Question 17

Does hydro cooling improve profitability and lifespan for the ANTRACK V2-EC2-DT?

Accepted Answer

On both counts. Stable liquid-cooled chip temperatures let the unit hold rated hashrate without thermal throttling, so real-world output tracks spec far more closely than air-cooled hardware in warm climates. Lower thermal cycling and zero dust ingress also extend hashboard life, improving realised ROI across a three to four year deployment.

ANTRACK V2-EC2-DT

Product overview

What is included

How to set up the ANTRACK V2-EC2-DT — step-by-step guide

1. Confirm site power before delivery

2. Build and pressure-test the water loop

3. Mount the miner and connect the coolant lines

4. Network the miner and find its IP

5. Configure your wallet and mining pool

6. Verify hashrate and stabilise

7. Monitor, maintain and get support

ANTRACK V2-EC2-DT — frequently asked questions

Keep researching the ANTRACK V2-EC2-DT

More Bitmain miners

Alternatives to consider

Guides & category hubs

Related hardware

ANTSPACE HW7

AR1901 Bitcoin Miner Heat Recovery Rack

ANTSPACE HW5

ANTSPACE HD5