Used ASIC Miners · June 12, 2026 · 7 min read
WhatsMiner M30S and M30S++ Used Buyer's Guide
The WhatsMiner M30S family is the backbone of the value tier: rugged, serviceable and cheap per terahash. It is also the most common machine we are asked to inspect, so the failure patterns are well understood.
This guide is written from how we source, bench-test, deploy and service WhatsMiner M30S hardware at our Hong Kong facility. Every recommendation links to machines we actually hold in stock, so you can go from research to a shortlist and a delivered price in one step — with shipping to the USA, Canada and Europe.
Used and Refurbished WhatsMiner M30S Units: What Changes
Second-hand WhatsMiner M30S hardware is where the best dollars-per-terahash usually live, but the risk profile shifts to you. Insist on a load test at full power for at least an hour, verify all hashboards report the expected chip count, check for corrosion on the board edges and PSU connectors, and look for replaced fans or reflowed chips — signs the unit has been repaired before.
Price used units at a level you would be comfortable writing off inside twelve to eighteen months. Every refurbished machine we sell is stripped, cleaned, load-tested and re-benched, and we publish the measured numbers rather than the datasheet numbers so you can price the risk honestly.
WhatsMiner M30S Specifications That Actually Matter
The WhatsMiner M30S ships rated 86-112 TH/s, 3,400 W at the wall, 31-38 J/TH efficiency, SHA-256 algorithm, air cooling. Those four numbers — hashrate, wall draw, efficiency and cooling method — decide everything else: what circuit you need, how much heat the room absorbs, and how the machine behaves when network difficulty climbs. Everything a spec sheet lists beyond that is packaging.
Treat the rated figures as a ceiling rather than a promise. Air-cooled units typically settle two to five percent below datasheet output once intake air passes 30 degrees Celsius, while liquid-cooled siblings hold their numbers far more consistently. We bench every WhatsMiner M30S before it ships and record the actual hashrate and wall draw on the test sheet that travels with the unit.
Running Cost: What WhatsMiner M30S Electricity Looks Like
At 3,400 W continuous the WhatsMiner M30S consumes roughly 82 kWh per day. At six cents per kilowatt hour that is about $5 of power per day; at twelve cents it doubles to roughly $10. Multiply by 30 and you have the only fixed cost that never negotiates.
Because power is the dominant cost, your electricity rate — not the purchase price — decides whether this machine belongs in your fleet. Run the numbers with hashprice cut by 30 percent before you buy. If the WhatsMiner M30S still clears its own power bill in that stressed scenario, the purchase survives a bad quarter; if it does not, you are betting on price appreciation rather than on mining.
Buying Checklist for a WhatsMiner M30S
Ask five questions before money moves: what the measured hashrate and wall draw were on the test bench, which firmware version is installed, whether hashboards are original or replacements, what the warranty covers in writing, and who pays return shipping if the unit arrives dead. A supplier that answers all five in writing is a supplier worth buying from.
Refuse pressure tactics, avoid escrow-free peer-to-peer deals for machines you cannot inspect, and confirm delivered pricing including freight and duty. Our WhatsMiner M30S stock is bench-tested and hashrate-verified from our Hong Kong facility, with worldwide shipping to the USA, Canada and Europe and written warranty terms.
Heat, Noise and Where the Machine Can Live
An air-cooled WhatsMiner M30S produces 72 to 80 dB continuously and dumps its entire 3.4 kW into the room as heat. That rules out living spaces without a garage, outbuilding, ducted enclosure or hosting contract. Noise, not electricity, is the reason most home mining purchases get resold within a month.
Whatever the cooling method, intake temperature is the metric to instrument. Log intake, exhaust and chip temperatures, alarm on 75 degrees Celsius chip temperature, and clean filters on a fixed schedule. Thermal discipline is the difference between a five-year machine and an eighteen-month one.
Payback Model: How to Calculate It Yourself
Payback in months equals delivered machine cost divided by monthly net profit, where net profit is mining revenue minus electricity. Revenue depends on hashprice, which moves daily with bitcoin price and network difficulty; electricity is fixed and known. Build the model in a spreadsheet with hashprice as the single variable and you will never be surprised by a market move again.
Model three scenarios for the WhatsMiner M30S: current hashprice, hashprice down 30 percent, and hashprice down 50 percent. If the middle case still shows positive cash flow, the purchase is defensible. If only the optimistic case works, either negotiate the price down or buy fewer units and keep the reserve.
Frequently Asked Questions
- What is the WhatsMiner M30S hashrate and power draw?
- The WhatsMiner M30S is rated at 86-112 TH/s drawing 3,400 W at the wall, which is 31-38 J/TH. Expect two to five percent below rated output in warm ambient conditions.
- How much electricity does a WhatsMiner M30S use per day?
- Roughly 82 kWh per day of continuous operation — about $7 per day at eight cents per kilowatt hour, or $196 per month.
- Is the WhatsMiner M30S still profitable?
- That depends on your power rate more than anything else. M30S and M30S++ units make money under about five cents per kWh and are the classic cash-flow purchase.
- Can I run a WhatsMiner M30S at home?
- Only with a dedicated 240 V circuit, real ventilation and tolerance for 72-80 dB. Most buyers end up ducting the exhaust, using an outbuilding, or hosting the machine.
- Do you sell used WhatsMiner M30S units with a warranty?
- Yes. Every used and refurbished unit is stripped, cleaned, load-tested and hashrate-verified before shipping, and ships with written warranty terms and worldwide delivery from Hong Kong.
- What should I pay for a WhatsMiner M30S?
- Work in dollars per terahash rather than absolute price: divide the delivered quote by rated hashrate and compare across listings. Ask our desk for current delivered pricing including freight so you can benchmark before committing capital.
Recommended Miners From Our Inventory
Hardware in stock that matches this guide. Every unit is bench-tested and hashrate-verified before it ships.

Used MicroBT WhatsMiner M30S++ 112 Th/s Bitcoin Miner
112 Th/s | 3472W
SHA-256 · Used
$299$349

Used MicroBT WhatsMiner M64 206 Th/s Hydro Bitcoin Miner
206 Th/s | 4099W
SHA-256 · Used
$2,190$2,390

Used MicroBT WhatsMiner M61 Hydro Bitcoin Miner
192 Th/s | 3540W
SHA-256 · Used
$2,490$2,790

Used MicroBT WhatsMiner M50S 128-134 Th/s Bitcoin Miner
134 Th/s | 3444W
SHA-256 · Used
$410$489

MicroBT WhatsMiner M60S+ 190 TH/s Bitcoin Miner
190 TH/s | 3441 W
SHA-256 · Used
$3,400

Used MicroBT WhatsMiner M50 118 TH/s Bitcoin Miner
118 TH/s | 3306 W
SHA-256 · Used
$950
Want the numbers run for your site?
Send us your electricity rate, available amperage and budget. We will model the machines that actually pay back at your power cost — no obligation.
Talk to an engineer